Grooming ceramic blades are precision zirconia cutters for personal-grooming and fiber-processing equipment. They can be used in hair and pet-grooming devices, textile carding or grooming machinery, and home-textile finishing systems that require a compact ceramic cutting part.

Core Advantages

1200-1400 HV Cutting Surface

This zirconia grade is specified at 1200-1400 HV hardness. Repeated contact with hair, fur, or fiber wears the same cutting line over many cycles; the hard surface slows abrasive edge wear and delays the rise in operating force.

Smooth Sliding Contact Under Reciprocation

The finished zirconia face gives the mating blade a smooth sliding surface. In high-frequency grooming heads, lower resistance at this interface reduces local drag and heat during reciprocating motion.

Corrosion-Free Surface in Frequent Cleaning

Water and damp residue do not cause red rust on zirconia during normal cleaning. The working face therefore avoids the corrosion pits and rust deposits that can interfere with blade-to-blade contact.

Customization

Blade Form

Standard grooming blade sizes plus irregular, ultra-thin, and special mounting structures produced to drawing.

Cutting Geometry

Blade thickness, edge angle, tooth profile, and cutting contour matched to the target grooming mechanism.

Development Basis

Non-standard parts developed from customer drawings, confirmed samples, or defined assembly requirements.

Quality Control

Small grooming-blade parts are checked after sintering and before final edge finishing. Inspectors look for distortion, cracks, damaged corners, and edge loss, especially deformation that could stop the moving ceramic piece from sitting evenly against its mating blade.

Final inspection covers cutting-edge continuity, flatness, the sliding contact face, and locating surfaces. Optical methods are used for micro features and small edge defects, while larger fit dimensions are measured with calibrated contact equipment.

Finished blades are 100% inspected before packing. Cleanliness, quantity, and visible condition are confirmed, and the inspection result remains tied to the production lot.

Product Parameters & Customization Details

Item	Parameters & Customization Details
Material Specification	Standard 3Y yttria-stabilized zirconia; high-toughness ceramic materials available; customer-supplied materials supported
Dimensions	Full range of standard grooming blade sizes available; irregular ultra-thin and special mounting structures can be customized according to drawings
Performance Index	Hardness 1200–1400HV; temperature resistance ≤1300°C; corrosion-resistant and non-oxidizing; performance tuning available based on working conditions
Machining Accuracy	Standard tolerance ±0.01mm; precision blade edge machining up to ±0.002mm available
Product Types	Standard grooming blades for mass production; supports small-batch prototyping and non-standard blade customization