Textile ceramic parts are zirconia components used for wear, positioning, yarn guiding, insulation, and structural functions in textile machinery. They are found in yarn-routing and threading assemblies, alignment mechanisms, chemical-fiber equipment, and other machine positions that require ceramic contact or electrical isolation.
Core Advantages
1200-1400 HV Wear Contact Surface
The zirconia material is specified at 1200-1400 HV hardness. At textile-machine contact points exposed to continuous yarn or component movement, the hard surface slows groove formation and wear.
Smooth Surface at Fiber-Contact Positions
Precision-finished zirconia has a smooth contact surface and does not form metal burrs. When yarn moves across guides, eyes, or contact faces at speed, the finished surface leaves fewer snag points that could abrade or fuzz the fiber.
Corrosion-Free Surface in Humid Textile Processing
Zirconia does not form red rust in humid and mildly corrosive textile environments. Wet-process residue, lint, and routine cleaning moisture therefore do not leave corrosion scale on the ceramic contact surface.
Customization
- Dimensions
Standard textile component sizes plus irregular and non-standard dimensions produced to drawing.
- Structure
Wear parts, positioning elements, guides, insulating pieces, and complex textile-machine structures produced from drawings or samples.
- Precision Range
Standard tolerance +/-0.01 mm; selected precision components up to +/-0.002 mm.
Quality Control
Inspection is divided by component function. Yarn-contact parts are checked for surface continuity, chips, scratches, and edge condition; positioning and structural parts are checked at holes, slots, locating faces, and other assembly features.
Polished guide surfaces and small contact zones are examined visually or optically. Fit dimensions are measured with calibrated contact equipment where appropriate, keeping surface acceptance separate from assembly geometry.
Before packing, all finished parts are checked for released dimensions, visible condition, cleanliness, and accepted quantity. Inspection results remain linked to the production lot for repeat-order traceability.
Product Parameters & Customization Details
|
Item |
Parameters & Customization Details |
|
Material Specification |
Standard 3Y yttria-stabilized zirconia; textile-specific wear-resistant ceramic formulations available; customer-supplied materials supported |
|
Dimensions |
Full range of standard textile component sizes available; irregular and non-standard structures can be customized |
|
Performance Index |
Hardness 1200–1400HV; temperature resistance ≤1300°C; wear-resistant and corrosion-resistant; suitable for complex textile environments |
|
Machining Accuracy |
Standard tolerance ±0.01mm; high-precision components up to ±0.002mm available |
|
Product Types |
Standard textile ceramic components for mass production; supports non-standard customization and small-batch prototyping |
FAQ
Q: What is the MOQ for textile ceramic parts?
A: There is no fixed MOQ; quantity and pricing are agreed per order.
Q: Which payment terms apply?
A: Standard orders use a 30% deposit and 70% balance after acceptance before shipment; custom orders use 50% deposit and 50% balance.
Q: How should lint or process residue be removed?
A: Use a soft brush, clean air, or a compatible cleaner; avoid metal scraping on finished ceramic surfaces.
Q: How should textile ceramic parts be clamped into a metal assembly?
A: Use aligned contact areas and avoid point loading, impact, and excessive interference.
Hot Tags: textile ceramic parts, China textile ceramic parts manufacturers, suppliers, factory, Automation Ceramic Parts, Ceramic Parts For Robots, Ceramic Spray Nozzle, industry ceramics, Robot Ceramic Joints, Textile Ceramic Parts
